In an appeal aimed at worldwide operators of quay cranes of all types and dimensions, global transport and logistics insurer is calling for increased attention to structural surveying as part of its on-going drive towards loss prevention.
The Club’s analysis of port and terminal incidents reveals a disturbing number of major structural failures in port equipment in recent years. Not only can this type of equipment failure be very costly in terms of repairs and operational downtime but can result in serious accidents and injuries.
Laurence Jones, TT Club’s Global Risk Assessment Director, stresses how essential it is for operators of ports and cargo handling facilities to establish a regular sequence of maintenance and thorough examination of all the lifting appliances it utilises. “Provisions for such examinations are specified in ILO Convention 152 and its accompanying Code of Practice, and represent the international standard for the port industry. The purpose of a thorough examination is to make sure a crane can continue working safely and effectively, and a crucial element of this with regard to a quay crane is the safety of its structure,” Jones emphasised.
The Club recommends that independent examinations are always performed when procuring any type of crane. The ILO Convention requires that before being brought into commission for the first time, lifting appliances are tested and a thorough examination carried out. The Club also recommends that appropriate mechanical and electrical inspections are carried out during installation and commissioning to check for quality and conformance to standards and specification – beyond the ILO Convention requirement. Once commissioned, a crane should also be examined regularly during its operational life, regardless of how good its manufacture. Damage resulting from relatively minor impacts, regular heavy-lifts close or equal to the safe working load limits, intensive use or simply general wear and tear can affect the integrity of the crane’s structure. Often such operational issues can occur without anybody being aware, so regular examinations need to be conducted. Any known incident should clearly result in a check on the structural integrity of the crane at that time. This advice applies equally to fixed and mobile cranes of any type.
The ILO standard calls for a competent person to carry out the testing and thorough examinations. ‘Competent person’ is defined as ‘a person possessing the knowledge and experience required for the performance of a specific duty or duties and acceptable as such to the competent authority’ and it is common practice to utilise third party inspection companies to check for quality and design conformance during manufacture. Laurence Jones recommends that only specialist inspection companies should be used, such as Bureau Veritas, Lloyd’s Register, Liftech Consultants and World Crane Services. These companies provide examinations globally during and after manufacture, although it is clear that there are other equally competent and locally based service providers. Thorough examinations during the life of the crane should fall within a strict maintenance policy that is seeking to maximise its useful life and minimise unplanned downtime.
The standard also defines a thorough examination as ‘a detailed visual examination by a competent person, supplemented if necessary by other suitable means or measures, in order to arrive at a reliable conclusion as to the safety of the appliance examined’ and an integral element of the examination should involve the crane structure itself. The Club’s analysis indicates that the actual structure, because of its size and complexity, may not always be examined as often as it should. The standard calls for such examinations to be conducted at least once every twelve months. Generally, as a crane gets older the examination frequency should increase. But, warns Jones, some countries have less stringent or no regulatory requirements at all in their laws. “All regulatory requirements must be adhered to, but for those with no regulatory requirements a minimum examination period should be implemented based on the international standards,” he stated. Furthermore, the regularity of examinations should increase based on the degree of use and if this is at or close to the crane’s safe working load limits. Obviously, regular mechanical, electrical and painting maintenance should also be implemented to ensure safe and reliable operation.
“We need to ensure compliance with the standard to ensure safe and reliable operations”, said Jones. “Regular crane examinations will in the long term save downtime and money. It makes economic sense. But more importantly it will save lives.”
ENDS
Note to Editors:
The TT Club is the international transport and logistics industry’s leading provider of insurance and related risk management services. Established in 1968, the Club’s membership comprises ship operators, ports and terminals, road, rail and airfreight operators, logistics companies and container lessors. As a mutual insurer, the Club exists to provide its policyholders with benefits, which include specialist underwriting expertise, a world-wide office network providing claims management services, and first class risk management and loss prevention advice.